IP Terminal Configuration:
Program
No.
Program Name
Input Data
Default
15-01-01
Basic Extension Data Setup - Extension Name
Up to 12 Characters
No Setting
15-05-02
IP Telephone Terminal Basic Data Setup - IP
Phone Fixed Port Assignment
MAC address
00-00-00-00-00-00 ~ FF-FF-FF-
FF-FF-FF
00-00-00-00-00-00
15-05-07
IP Telephone Terminal Basic Data Setup - Using
IP Address
Read Only:
0.0.0.0 ~
255.255.255.255
Refer to the Program-
ming Manual for the
default values.
15-05-16
IP Telephone Terminal Basic Data Setup - Au-
thentication Password
Up to 24 characters
No Setting
15-05-18
IP Telephone Terminal Basic Data Setup - IP Du-
plication Allowed Mode
0 = Disable
1 = Enable
0
15-05-40
IP Telephone Terminal Basic Data Setup - Calling
name display info via trunk for standard SIP
0 = Both name and number
1 = Name only
2 = Number only
3 = None
0
15-05-43
IP Telephone Terminal Basic Data Setup - Video
Mode
0 = Disable
1 = Enable
0
15-05-49
IP Telephone Terminal Basic Data Setup - Re-
ceiving SIP INFO
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is not
available
1
Out of Range Notification:
Program
No.
Program Name
Input Data
Default
24-02-03
System Options for Transfer - Delayed Call For-
warding Time
0 ~ 64800 seconds
10
24-02-15
System Options for Transfer - SIP Out of Range
Timer
0 ~ 30 seconds
4
24-09-01
Call Forward Split Settings -
Call Forwarding Type
0 = Call Forwarding Off
1 = Call Forwarding with Both
Ringing
2 = Call Forward when No An-
swer
3 = Call Forwarding All Calls
4 = Call Forwarding when Busy
or Not Answered
5 = Call Forwarding when Busy
0
24-09-02
Call Forward Split Settings -
CO Call Forwarding Destination for Both Ring,
All Call, No Answer
Maximum of 36 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-03
Call Forward Split Settings -
Intercom Call Forwarding Destination for Both
ring, All Call, No Answer
Maximum of 36 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
ISSUE 1.0
SL2100
Features and Specifications Manual
1-505
I
Summary of Contents for UNIVERGE SL2100
