NEC UNIVERGE SL2100, Features And Specifications Manual

Page: 932 / 978

5. Press Hold key (Multiline Terminal only) to cancel the procedure without erasing (and return to
step 3).
- OR -
Hang up to erase the message.
To record, listen to or erase a VRS message if you call in using DISA:
1. Place call to the system.
You hear dial tone.
2. After the system answers, dial the DISA password (normally 000000).
You hear dial tone.
3. Dial 616 and the VRS password.
4. Dial the function you want.
7 = R ecord
5 = L isten
3 = E rase
5. Dial the message number (001~100), record the message and press # to end recording.
If you dialed 7 to record, you can dial # to listen to the message you just recorded.
If you dialed 5 to listen, you can dial 5 and the message number to hear it again or if you want to
Record, listen to or erase another message, go back to step 4.
General Message
To listen to the General Message:
Multiline Terminal Only
Your Message Waiting LED flashes when there is a new General Message. A voice message
periodically reminds you.
1. Do not lift the handset or press Speaker key.
2. Dial 611 .
You hear the General Message.
Normally, your Message Waiting LED goes out. If it continues to flash, you have unanswered Message
Waiting requests or new messages in your Voice Mail mailbox.
To record, listen to or erase the General Message:
1. Press Speaker key or lift the handset.
- OR -
At Single Line Terminal, lift the handset.
2. Dial 612 .
SL2100 ISSUE 1.0
1-918 Voice Response System (VRS)
V