manualshive.com logo in svg

NEC UNIVERGE SL2100, Features And Specifications Manual

The NEC UNIVERGE SL2100 is a cutting-edge communication system that offers seamless integration of voice, video, and advanced applications. To assist with its installation, we provide a comprehensive Installation Manual available for free download from our website, ensuring a smooth and hassle-free setup process.

Share
Download
background image

Voice Band Data (VBD) is what is called modem over IP. This feature enables use of VBD (Voice Band
Data) by System. If use VBD. Analog modem signal is converted into voice band data and can be
submitted via SIP Trunk.

For a list of vendors that have successfully completed interoperability certification go to 

http://

www.necntac.com

 and refer to Technical Documentation.

SIP Trunk E.164 Support

With the SIP Trunk E.164 Support enabled the PBX is able to support SIP configurations where the
number presentation within the SIP messages is formatted using the E.164 international numbering
scheme. Specifically the system is able to handle the ‘+’ digit when required as the International
Access Code.

For example a normal international SIP call could be dialed and presented from the system as follows;
Number dialed = 

00441202223344

Request-URI: Invite sip: [email protected] SIP/2.0

However with SIP Trunk E.164 Support enabled the SIP call could be presented once dialed as below;

Request-URI: Invite sip:[email protected] SIP/2.0

This presentation can be a requirement of certain SIP ITSPs (Internet Telephony Service Providers) so
it is necessary the PBX can handle these calls and modify any SIP messages to the correct format
accordingly.
Below is the full list of SIP header fields used by this feature:
Request-URIToFromP-Asserted IdentityP-Preferred Identity

SIP Trunk E.164 CLIP Enhancement

With the SIP Trunk E.164 CLIP Enhancement enabled, when an incoming SIP call from an external
ITSP is presented at the system with a “+” in the From header field as the international access code, it
is recognized and displayed as an international call at the terminal display and also logged in the
terminals incoming caller history, allowing any outbound calls made from a multiline terminals caller
history possible using this numbering scheme.

This presentation can be a requirement of certain SIP ITSPs (Internet Telephony Service Providers) so
it is necessary the PBX can handle these calls and modify any SIP messages to the correct format
accordingly.

FAX path through mode

When SIP Carrier does not support the T.38 Fax relay function, FAX relay can be established using
FAX Path through mode via SIP trunk.

SIP Multi Profile Support

With the SL2100 you can have six SIP Profiles allowing you to connect to six different SIP Carriers, or
allow you to have a SIP System Interconnection and connection to a SIP Carrier.

Conditions

• A maximum of 64 IP Trunks are supported in the SL2100.
• The SL2100 can support six SIP profiles. Multiple carriers or SIP System can be used at the same

time.

• A SIP profile is set to each SIP trunk in Program 14-18-05.
• Calling Party Name is not provided for outgoing calls on SIP trunks.
• E.164 is supported for all carrier choices (PRG 10-29-14).
• E.164 CLIP feature is only possible from Multiline Terminal.
• If VAD is Enable, RTP forwarding (PRG 10-26-02) is not running.
• PRG 84-13-65 applies to system not by each codec.

SL2100

ISSUE 1.0

1-510

IP Trunk - (SIP) Session Initiation Protocol

I

Summary of Contents for UNIVERGE SL2100



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for UNIVERGE SL2100

Accutone V10 Install Manual & User Manual preview
V10
Brand: Accutone Pages: 10
Garmin GMA 340 Supplemental Operation Manual preview
GMA 340
Brand: Garmin Pages: 10
S&S Northern Merlin 1000VW+ Installation, Operating And Maintenance preview
Merlin 1000VW+
Brand: S&S Northern Pages: 9
Magnavox FW650C/22 User Manual preview
FW650C/22
Brand: Magnavox Pages: 24
Medion LIFE P64014 User Manual preview
LIFE P64014
Brand: Medion Pages: 220
FAAC MASTER-B Manual preview
MASTER-B
Brand: FAAC Pages: 16
Jensen JWM40 Quick Reference Manual preview
JWM40
Brand: Jensen Pages: 2
Fender PASSPORT P-80 Owner'S Manual preview
PASSPORT P-80
Brand: Fender Pages: 51
VAT Series 651 Installation, Operating, & Maintenance Instructions preview
Series 651
Brand: VAT Pages: 53
ITC TS-0690 User Manual preview
TS-0690
Brand: ITC Pages: 15
DAEWOO ELECTRONICS AMI-926LM/RM Service Manual preview
AMI-926LM/RM
Brand: DAEWOO ELECTRONICS Pages: 34
Roadstar CDR-485US/BK Instruction Manual preview
CDR-485US/BK
Brand: Roadstar Pages: 26
Zenitel Phontech ICS 6200 Installation Manual preview
Phontech ICS 6200
Brand: Zenitel Pages: 193
Laguna Tools SmartShop Maker Owner'S Manual preview
SmartShop Maker
Brand: Laguna Tools Pages: 70
New Rock Technologies WROC2000 User Manual preview
WROC2000
Brand: New Rock Technologies Pages: 71
Curtis RCD820 User Manual preview
RCD820
Brand: Curtis Pages: 11
Vicon Pilot Lite V1522 Installation And Operation Manual preview
Pilot Lite V1522
Brand: Vicon Pages: 138
Overmax OV-CR-422 Instruction Manual preview
OV-CR-422
Brand: Overmax Pages: 32

Brands by name

Popular brands

Load more brands