NEC UNIVERGE SL2100, Features And Specifications Manual

Page: 854 / 978

Program
No.
Program Name Input Data Default
22-08-01 DIL/IRG No Answer Destination - Incoming Ring
Group Number 0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
24-02-01 Transfer System Options - Transfer to busy Ex-
tension 0 = Disable (No)
1 = Enable (Yes) 1
24-02-02 System Options for Transfer - MOH or Ringback
on Transferred Calls 0 = Hold Tone
1 = Ring Back Tone 0
24-02-03 System Options for Transfer - Delayed Call For-
warding Time 0 ~ 64800 seconds 10
24-02-04 System Options for Transfer - Transfer Recall
Time 0 ~ 64800 seconds 30
24-02-05 System Options for Transfer - Message Wait
Ring Interval Time 0 ~ 64800 seconds 30
25-06-01 VRS/DISA One-Digit Code Attendant Setup -
Next Attendant Message Number 0 ~ 100 (0 = No Setting)
101 = Voice Mail answers
104 = Refer to Programming
Manual.
105 = Dial the other extension 0
25-06-02 VRS/DISA One-Digit Code Attendant Setup -
Destination Number Up to eight digits
Must be a valid extension
number that is programmed
in command 11-02 or 11-04.
No Setting
31-05-01 Universal Night Answer/Ring Over Page - Univer-
sal Night Answer/Ring 0 = No Ringing (No)
1 = Ringing (Yes) 0
Operation
Transferring Trunk Calls
To Transfer a trunk calls to a co-worker's extention:
1. At the Multiline Terminal, press Hold/Transfer key.
- OR -
At a Single Line Terminal, hookflash.
You hear Transfer dial tone.
2. Dial the co-worker’s extension number.
If the extension is busy or does not answer, you can dial another extension number or press the line
key to return to the call. In addition, you may be able to hang up and have the call Camp-On.
SLT users can retrieve the call by pressing hookflash. If a call has been transferred and the SLT user
has hung up the handset, the call can be retrieved by dialing
** and the extension number to which it
had been transferred.
SL2100 ISSUE 1.0
1-840 Transfer
T