NEC UNIVERGE SL2100, Features And Specifications Manual

Page: 18 / 978

Cursor Key Operation (When set PRG 15-02-60:0)
By pressing the Right Cursor key, the user can access all directory menus. The flow chart below
shows the menu access sequence (refer to
Figure 1-1 Right Cursor Key Operation Flow Chart on
page 1-4 ). If the terminal is not allowed access to Speed Dial and/or Telephone Book numbers or no
telephone numbers are programmed in those areas, they are skipped.
Common speed
Dial Search
Group Speed
Dial Search
Extension
Number Search
Menu
Common SPD
Group SPD
Extension Number
Associated Program
PRG 13-01-03
PRG 13-02-01
None
Related Programs
If the menu is disable by programming or there are
no numbers in a telephone book the menu will be
skipped and the next menu will appear.
= Press Left Cursor key
Once the LEFT key is pressed, the Right Cursor
key can be used to switch between the Redial and
Incoming History menus.
Figure 1-1 Right Cursor Key Operation Flow Chart
Conditions
• Speed Dial bins can contain stored Account Codes. To prevent them from being displayed use PRG
35-05-04.
• ARS selects the trunk for the call unless selected by the user.
• A user can implement Speed Dial only if their extension has access to outgoing trunks.
• An extension can have a One-Touch Key for Speed Dial operation.
• If you enter a PBX trunk access code in a Speed Dial bin, the system automatically inserts a pause
after the bin.
• Single Line Terminals can dial only System and Group Speed Dial numbers.
• Toll Restriction may prevent a user from using a stored Speed Dial number.
• Unless selected by the user, Trunk Group Routing selects the trunk Speed Dial uses for trunk calls.
• If the Speed Dial bin does not have a name assigned it does not show when scrolling through the
directory of speed dials.
• If PRG 13-01-01 is set to 1 (Intercom Access mode), system speed dial bins require inserting a
trunk access code.
• When operating the Right Cursor key, if the menu is disabled by programming or there are no
numbers in a telephone book, the menu is skipped and the next menu will appear.
• If a name is not associated with a speed dial bin, the speed dial entry will not show up when
scrolling through the terminals Softkeys.
• When PRG 13-01-03 is set to 100 bins (00 ~ 99) 13-01-02 Station Speed Dialing must be disabled
for bins 80 ~ 99 to be available as Common Speed Dial Bins.
• When PRG 13-01-02 is Enabled with 13-01-03 set as 100 bins (00 ~ 99) bins 80 ~ 99 are reserved
for Station Speed Dial Bins (01 ~ 20) and are not used as Common Speed Dials.
Default Settings
Available (No Speed Dialing bins are assigned).
SL2100 ISSUE 1.0
1-4 Abbreviated Dialing/Speed Dial
A