NEC UNIVERGE SL2100, Features And Specifications Manual

Page: 217 / 978

Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-10-17 Service Code Setup (for System Administrator) -
Dial Block by Supervisor 0~9,
*
, # Maximum of 8 digit 601
11-11-33 Service Code Setup (for Setup/Entry Operation) -
Dial Block 0~9, * , # Maximum of 8 digit 600
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions 1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-08 Class of Service Options (Outgoing Call Service)
- Toll Restriction Dial Block 0 = Off
1 = On COS 01 ~ 15 = 1
21-07-01 Toll Restriction Override Password Setup - Pass-
word Four Digits (Fixed) No Setting
21-09-01 Dial Block Setup - Toll Restriction Class With Di-
al Block 1 ~ 15 15
21-09-02 Dial Block Setup - Supervisor Password 0 ~ 9,
*
, #
(4-digit fixed)
No Setting
21-10-01 Dial Block Restriction Class Per Extension - Toll
Restriction Class 0, 1 ~ 15
(0 = No Setting) 0
90-19-01 Dial Block Release - Delete IP Telephone [Release ?] : Dial 1 + press Hold
(Press Hold only to cancel.)
-
Operation
To set Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 600 (default).
3. Dial the 4-digit Dial Block Code (as set in programming).
4. Dial 1 .
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
To release Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 600 .
3. Dial the 4-digit Dial Block code.
4. Dial 0 .
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-203
C