NEC UNIVERGE SL2100, Features And Specifications Manual

Page: 585 / 978

Program
No.
Program Name Input Data Default
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
15-13-01 Loop Keys - Outgoing Option 0 ~ 50
(0 = Assigns the Loop Key for
ARS, 1 ~ 50 = Assigns the Loop
Key to the trunk group specified) 0: Programming Func-
tion Key No. = 01 ~ 24
15-13-02 Loop Keys - Incoming Option 0 ~ 50
(0 = Assigns the Loop Key to all
trunk groups,
1 ~ 50 = Assigns the Loop key to
the trunk group specified) 0: Programming Func-
tion Key No. = 01 ~ 24
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override 0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.) COS 01 ~ 15 = 1
20-07-10 Class of Service Options (Administrator Level) -
Programmable Function Key Programming (Ap-
pearance Level) 0 = Off
1 = On COS 01 ~ 15 = 1
22-04-01 Incoming Extension Ring Group Assignment -
Extension Number Maximum eight Digits Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
22-05-01 Incoming Trunk Ring Group Assignment - In-
coming Group Number 0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM 1
Operation
To place a call on a loop key:
1. Press outgoing or both ways loop key.
You hear dial tone and the key lights green.
2. Dial number.
To answer a call on a loop key:
Listen for ringing a look for a flashing loop key.
1. Press the loop key.
The key lights green and you connect to the call.
If there are additional calls waiting to be answered, your display shows: [Waiting - Loop Key]
To program a loop key:
1. Press the Speaker key.
2. Dial 752 .
3. Press the key you want to program as a loop key.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-571
L