NEC UNIVERGE SL2100, Features And Specifications Manual

Page: 15 / 978

Features
S
ECTION
1 ABOUT THIS CHAPTER
This chapter provides an alphabetical listing of the features that are available with the SL2100 system.
Each feature provides the following information:
Description - briefly describes the feature and how it is used.
Conditions - provides special operating conditions (if any) that need to be considered with using the
feature.
Default Settings - indicates the factory default setting (if any).
System Availability - describes Multiline Terminals that can be used with this feature and lists any
additional equipment, such as adapters or units, which must be installed for this feature to operate.
Programming - lists the memory blocks that support the feature.
Related Features - lists features that are associated with the feature being described (e.g., the
Account Codes feature lists the Speed Dialing feature in the related features list because speed
dialing bins can contain stored account code (if any).
Operation - provides step-by-step instructions for using the feature.
S
ECTION
2 FEATURES
Simplifying Multiline Terminal Operation with One-Touch Keys
A Multiline Terminal user can access many features Service Codes (e.g., Service Code 744 sets Call
Forward Busy/No Answer). To streamline the operation of their telephone, a Multiline Terminal user
can store these codes under One-Touch Keys. This provides one-button operation for almost any
feature. To find out more, turn to the One-Touch Calling and One-Touch Serial Operation features.
Programmable Keys
When reading an instruction using programmable keys, you will see a notation similar to ( PRG 15-07
or SC nnn ). This means that the key requires service code nnn, and you can program this code in
PRG 15-07 or by dialing Service Code 751 or 752. Refer to the Programmable Function Keys feature
for more information.
Using Handsfree
The manual assumes each extension has Automatic Handsfree. This lets a user just press a line key
or
Speaker key to answer or place a call. For extensions without Automatic Handsfree, the user must:
• Lift the handset or press Speaker key for Intercom dial tone.
• Lift the handset or press Speaker key, then press a line key for trunk dial tone.
Features and Specifications Manual 1-1
Features
1