NEC UNIVERGE SL2100 Features And Specifications Manual Download Page 42

Page: 42 / 978

<< Alarm Report

05/16/2006 14:30 PAGE 001

LVL

STAT

DATE

TIME

ITEM

UNIT

SLT

PRT

PARAMETER

MIN

0068

ERR

01/22/09

09:40

VoIP All DSP

Busy

VoIPDB

NET

Table 1-3 Alarm Report Definitions

Alarm Report Heading

Definitions

LVL

Alarm Type (MAJ = Major, MIN = Minor)

Number of Alarm (4-digit)

STAT

Status (REC = Recovered, ERR = Error, WAR = Warning

DATE

Date the Alarm Occurred

TIME

Time the Alarm Occurred

ITEM

Name of the Alarm

UNIT

Name of the Board

SLT

Chassis Slot Number

PRT

Chassis Port Number

PARAMETER

Related Information

Table 1-4 Alarm Report Item Definitions

Item Name

Definition

PKG Installation

Board is removed or inserted.

ISDN Link

ISDN Line failure is detected.

CPU LAN Link

CPU LAN connection failure is detected.

Blocking

Terminal Failure may have occurred because terminal blocking is detected. Termi-
nal is unplugged or wire is disconnected.

System Data Change

System Upgrade performed or Programming change.

System Start Up

System is reset.

SMDR Link

Connection failure is detected between the CPU and SMDR printer device.

STA

DSP for IP Station Call were all busy.

TRK

DSP for Trunk Call were all busy, includes SIP trunks.

NET-DSP

SL Net Call when all DSP resource is busy.

Conditions

• Alarm reports can not be stored on SD card in SL2100.
• The supports the following Alarms to be output to the LCD of a Multiline Terminal:

- SMDR Buffer Full
- CPU-LAN link Error

• The SL2100 does not support printouts of the following Alarms:

- Power Failure
- RAM Backup Battery Error
- Networking Keep Alive Error

• Up to 12 System Alarm times can be scheduled to print on a Monthly, Daily, and Hourly time frame.

The report indicates both Major and Minor Alarms.

• When using the E-mail functionality of reports, the E-mail address in PRG 90-11-10 (From Address)

must be set for the E-mail feature to work.

SL2100

ISSUE 1.0

1-28

Alarm Reports

Summary of Contents for UNIVERGE SL2100



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UNIVERGE SL2100

Reviews:

Related manuals for UNIVERGE SL2100

Brands by name

Popular brands

NEC UNIVERGE SL2100, Features And Specifications Manual

Search results

Summary of Contents for UNIVERGE SL2100

Reviews:

Related manuals for UNIVERGE SL2100

Brands by name

Popular brands