NEC SV8500, Programming Manual

Page: 244 / 410

– 228 –
P-45A PERSONAL EMERGENCY AND ASSIST - ACD
To cancel a personal assistance request:
1. After initiating an assistance request and before being answered by the supervisor, the agent may cancel the re-
quest by pressing the TRANSFER key.
2. The
ASSIST
lamp will be extinguished, the agent will be reconnected with the ACD call, and the display will
return to its original status.
To place a personal emergency request:
1. While engaged in an ACD call, the agent presses the EMERGENCY key, the agent’s display shows EMR
KATHEY , and the associated lamp is lit.
2. The supervisor’s phone rings with the emergency displays shown below.
3. The supervisor will silently monitor the agent and the calling party.
4. The supervisor’s display shows EMR 4302 DDD 28 , where 4302 is the agent position’s extension and DDD 28
is the trunk type and trunk circuit number to which the agent is connected.
5. When the supervisor answers, the agent’s display will show EMERG ANSWERED and the EMERGENCY
lamp will wink. When the agent releases from the call, or the supervisor releases from the monitor, the agent’s
lamp will be extinguished.
6. The agent and the calling party are never disconnected while the supervisor’s position is ringing.
7. An emergency recorder is connected as soon as the supervisor’s position answers and is disconnected if the su-
pervisor joins the call in a three-way conference by pressing the
MON/BARGE
key. The recorder is also dis-
connected if the supervisor releases from the monitor using the RELEASE key.
To cancel a personal emergency request:
1. If the request is routed to an individual supervisor’s ACD/Non-ACD line, the request can be canceled by press-
ing the
EMERGENCY
key.
SERVICE CONDITIONS
1. The ASSIST key and the personal assist request number are dedicated to one of two features; either the key
and the number are used for the ASSIST feature or they are used for the MONITOR ME-ACD [M-89A] feature.
The choice is indicated through an ACD PCPro command on a split-wide basis.
2. When a Personal Emergency or Personal Assist call destination is a station which has Call Forward All, Busy
or Don’t Answer set the call will not be forwarded.
PROGRAMMING
STEP 1: ACDLOG - PARN: Personal Assist Request number
PERN: Personal Emergency Request number
STEP 2: ACDSPL - RMON=0 (Assist)