Naviter Oudie 2, Manual

Page: 152 / 185

Oudie 2 147
© 2003 - 2015 ... Naviter d.o.o.
Show Radar: Through this setting you may setup a Zoom level below which the Flarm radar is visible.
Default value is 10km which is also a suggested value. The reach of the Flarm Radar is about 3km and it
depends largely on the placing of the Flarm antenna in both transmitting and receiving aircrafts. The 3km
radar circle at Zooms above 10km becomes small and the screen cluttered, therefore we suggest 10km
as a default for this setting.
Show lost device for [s]: When sygnal from a particular Flarm device is lost, the aircraft remains
blinking on screen for this duration (default 120 seconds). After that the aircraft symbol is removed from
screen. If you were previously navigating towards the aircraft in question, the Target remains blank after
this period.
Show Labels: defines whether or not the labels with Friendly name (if entered), altitude and average
vario are visible.
Transparent Labels: defines whether or not the labels are transparent. When the labels are not
transparent (which is the default setting) then there is a white background behind the labels for each
Flarm unit. The labels may overlap. In that case the label for the device that you are navigating towards
(the one that is selected as Goto) is drawn on top of all labels. If you are not navigating towards a
particular Flarm device, then the closest label is drawn on top of the other ones.
Track length [s]: This is the duration for which you may see each Flarm's track in the Map view.