Naviter Oudie 2, Manual

Page: 93 / 185

Menu 88
© 2003 - 2015 ... Naviter d.o.o.
7.8 Wind
This dialog lets you see the wind in the third dimension as well as
quickly adjust the wind for either one or several layers.
To change the wind,
1. select a layer or several layers by dragging over the left side of the dialog
2. draw a wind vector in the square in the lower right corner
3. longer line means stronger wind. Direction of the movement determines direction of the wind
4. If needed, adjust Direction and Speed with the buttons in the lower part of the display
5. tap Apply, then OK.
Wind is calculated using three methods in SeeYou Mobile
. Position drift when Lat/Lon are the only available data
. Groundspeed difference when groundspeed and track are received from the GPS
. Combination of Groundspeed and straight flight when true air speed is received from the instrument. In
this case, the wind is updated in straight flight as well.