Naviter Oudie 2, Manual

Page: 154 / 185

Oudie 2 149
© 2003 - 2015 ... Naviter d.o.o.
8.22 Hardware
You can tell the Oudie 2 which GPS is at the other end of the Serial cable for some devices in order to be
able to communicate with it. You can do that with the
Device drop down list. Note that some devices are
recognized automatically. A dialog will pop up in that case to let you know that a device was recognized.
MacCready, Ballast, Bugs settings may be sent or received to some devices. Uncheck Receive from
device if you don't want the device to change these settings in SeeYou Mobile. Uncheck Send to device
if you don't want to change settings on the device through SeeYou Mobile. Play sound alarms on
device lets you enable playing sound alarms on the device which is connected to SeeYou Mobile.
Current label tells you which device was recognized. A caption Generic GPS means that the device was
not recognized as one of the special devices.
Port settings... opens up the COM Options dialog.
Terminal... button opens up a dialog where NMEA input can be monitored.
138
150