Naviter Oudie 2, Manual

Page: 12 / 185

Oudie 2 7
© 2003 - 2015 ... Naviter d.o.o.
Note for Oudie IGC: The Oudie IGC looks the same as the sketch above with the only difference that the MiniUSB connector is
at the other end of the device and that a quick charger connector is located next to the miniUSB connector.
2.2 Turning Oudie 2 on and off
To turn the Oudie 2 ON press the power button for 1 second. In order to prevent turning on the device by
accident you have to press the confirm button in five seconds.
To turn the Oudie 2 OFF go to Menu > Next > Exit > Yes . Once SeeYou Mobile software is turned off ,
press the power button for 1 second while the device is running then choose the desired action:
Power Off : will stop the navigation and turn off the device. You should do this before long term
storage. Battery should be at least 50% full before you store it for a long time.
Sleep : will turn off the screen, GPS, Bluetooth and power down the processor. The navigation will be
put on hold and the battery will drain very slightly. After switching back on you are ready for navigation
in just a few seconds. You should use the Sleep function when you are waiting to launch and want to
conserve the battery for example. It's ok to use Sleep over night as well. The battery drain is
negligible.
Cancel : will do nothing and return focus to navigation.
To reboot press the reset button on the back of the device.
See also:
Getting to know Oudie 2
2.3 Upgrading firmware
Keep your Oudie 2 updated at all times with OudieUpdater.
OudieUpdater is a very simple, amazingly effective software. It will help you keep your Oudie 2 updated
with latest versions, airspaces files and maps at all times.
On windows it installs into the tray, sits there quietly until there is something you need to know. That’s
all! Press the buttons when there is something to update and keep your Oudie 2 updated at all times. Just
look out for this message:
Click on message and OudieUpdater will show up:
6