Naviter Oudie 2, Manual

Page: 153 / 185

Settings 148
© 2003 - 2015 ... Naviter d.o.o.
Show tracks: defines whether or not the tracks of the Flarm devices are visible in Map view.
Colors are designed to present three values. The color for aircraft more than 100 meters below your
current altitude is defined by the first Below me selection box. The color for aircraft that are less than
100 meters below or above your current altitude is defined by the Inside 100m (i.e. roughly 300ft)
selection box. The color for aircraft more than 100 meters above your current altitude is defined by the
first
Above me selection box. Default colors are black for "Below me" and "Above me" and red for
"Inside 100m".
8.21 Miscellaneous (Misc)
The Miscellaneous dialog takes care of all the rest of the options, not covered in other parts of the
application.
If all goes wrong, you can Restore all settings to default by checking this check box and restarting
the application.
If the Power management checkbox is enabled then the device's power saving options are overridden.
For example. If your device is setup to turn off if not used for 2 minutes, then this option can override
this option while Oudie 2 detects flying mode. Please note that if not used carefully turning this feature on
can deflate your battery.
You can choose Distance calculation on Spheroid or Elipsoid.
Manage profiles... button allows you to add new profiles to Oudie 2. One application for several profiles
is when you fly different paragliders and need different setups for them (competiton flying, XC flying,
etc.). Second reason to have more profiles is when several people use the same Pocket PC in one glider.
When there is more than one profile available, you get to choose it when starting the application.When
there is more than one profile available, you get to choose it when starting the application.
Reset "do not show again" . There is several dialogs with "do not show again" labels at the bottom. If
you would like to see them all again, press this button.
Copy map settings... will replace settings of one map with settings from the other map. Please read
the message in the dialog carefully, so you don't accidentally replace the wrong map settings.