Naviter Oudie 2, Manual

Page: 24 / 185

Oudie 2 19
© 2003 - 2015 ... Naviter d.o.o.
3 How to
The How to Chapter will cover the basics and some details about how to use your Oudie most effectively.
Using Profiles
Setting the takeoff altitude
Managing airspace warnings
Using the Thermal Assistant
Using Side view
Entering the task
Flying badge, record and racing tasks
Flying the Assigned Area tasks
Flying with the FAI Triangle Assistant
Using the Flarm Radar
Use Vario in Oudie IGC
Finish flight
Connect to the internet
Connect to SeeYou Cloud
Connect to Soaring Spot
3.1 Using Profiles
If you feel no need to use more than one set of navboxes or fly more than one sailplane ignore this
feature and go read the next chapter.
If however you fly several types of gliders or fly at different locations you are likely to be fed up with
changing the polar, terrain, waypoint and airspace files each time before the flight. Profiles were added
in SeeYou Mobile 5.0. You can have separate setups for each of your club's gliders plus one profile for
the competition you are attending shortly. Here's how it works.
1. When you first ran SeeYou Mobile, a Default profile was created. Anything you have changed in the
application was stored to this profile. Now comes a day when you fly the single seater of your club with a
significantly different polar and GPS source than the one you have used previously. To avoid entering the
polar, header and hardware data each time you go fly this glider, you may create a new profile by going
to
Menu > Settings > Misc and click the "Manage Profiles..." button.
19
21
23
25
27
28
37
39
47
49
53
55
58
59
148