Naviter Oudie 2, Manual

Page: 71 / 185

Map page 66
© 2003 - 2015 ... Naviter d.o.o.
In the example screenshot three Flarm devices are visible. By default they are sorted on distance from
the tap on the screen. If you tap on a specific aircraft that aircraft will be the first on the list. First item in
the screenshot is "DD8D07". This code is the Flarm identification number and thus not very useful or
intuitive. This is why you may select a device and click Edit to rename a specific Flarm to give it a
readable name. In the example screenshot above, two flarm devices were renamed to "Friend" and
"Enemy" respectively.
You may also select a device and then Goto . This way you start navigating towards the selected Flarm
device for as long as it is within range. When it goes out of range, the aircraft symbol for that device will
start blinking for a default period of 120 seconds. After that the target becomes blank and the device is
removed from the maps and lists.
See also:
Getting Started > Flarm Radar
Settings > Flarm
4.1.3 Airspace
A tap on an airspace brings up a dialog where you can read the information on the airspace.
By default this page shows all airspace within a certain margin around the area of your tap. You can
quickly change the status of any of these airspaces by using the buttons for disabling an airspace for
49
146