Naviter Oudie 2, Manual

Page: 17 / 185

Getting started 12
© 2003 - 2015 ... Naviter d.o.o.
See also:
Getting Started
2.5 Learning to use Oudie 2
There is two recommended options to learn SeeYou Mobile before you get airborne.
File replay
This is by far the most efficient way to learn Oudie 2 software. What it does is it replays an already flown
flight and enables you to see the data you would have been looking at if you had Oudie 2 with you on the
particular flight.
In order to set this up, copy some of your flights from the desktop PC to your device. Then go to Menu >
Settings > Input , then change input to "File". Press the "..." button and choose a flight you wish to
replay. Alternatively you can go to Menu > Logbook > choose the flight you wish to replay > Tools >
Replay flight. Then use the buttons to change Waypoints, MacCready and pages. Tap on the screen to
see what happens and setup Navboxes to what you want them to be. Note that you can setup
Navboxes
separately for each of the two Map pages.
Simulator
In the Simulator input mode, you can move the glider freely even without a prerecorded flight which
enables you to go places you haven't visited in the air yet. To move the glider, tap on it, then drag a line
out of the glider in the direction you want it to move. The longer the line, the faster it will go in the
6
137
124