Naviter Oudie 2, Manual

Page: 45 / 185

How to 40
© 2003 - 2015 ... Naviter d.o.o.
given meteorological conditions. Assigned Area tasks can hardly be considered without using a Pocket PC
device and its intuitive use of the touch screen.
1. Enter the task you will be flying.
You will need to go to the Menu > Task dialog. Use the keypad to enter waypoint names in list view.
Type first few characters, then use left and right keys to complete the selection.
After you have entered the task waypoints, you must setup the properties for the Assigned Areas. Click
on the Edit button of each waypoint to open
Edit point dialog. To make the sector an Assigned Area,
you should:
. check the Assigned Area checkbox
. enter Direction, Angle12, Radius1, Angle1, Radius2 and Angle2 values as assigned at the briefing.
To setup a "disc" shape sector, you should enter
Direction = Symmetric (not required)
Radius1 = a value in kilometers or miles, given at the briefing
Angle1 = 180°
Assigned Area = Checked
99
102