Naviter Oudie 2, Manual

Page: 16 / 185

Oudie 2 11
© 2003 - 2015 ... Naviter d.o.o.
Mobile Wizard connects SeeYou with Oudie 2 to transfer files via Active Sync. Mobile Wizard never
expires. That means you don't have to have a registered version of SeeYou to transfer all of the required
data to the Pocket PC.
1. Set your USB port as Active Sync. After powering on your Oudie go to settings screen and under USB
port select Active Sync (See more at Main screen ).
2. Connect Oudie to your PC by connecting the USB cable
3. Tap "Connect to PC" on your Oudie screen to start the communication if prompted (newer Oudies
won't ask)
4. Remember which drive letter was assigned to your Oudie
5. Run SeeYou
6. Go to File > Mobile Wizard
First page of the Mobile wizard allows you to select the Items you wish to transfer to the device. You
can choose from
. Waypoints and Tasks
. Airspace
. Settings (Vector map color scheme, units, triangle properties, default observation zones)
Second page gives you the possibility to select basename and destination folder for the data you have
selected to upload on the first page.
. Files that will be created will have the same name as Basename and respective extensions CUB for
airspace, CIT for vector maps and CUP for waypoints and tasks.
. Choose "Copy to my Computer" as the destination for files
. Click "Browse" to select the location on your Oudie where you would like to save the files
. Use the Browse buttons to select the destination folder easily.
Third page asks you to draw a rectangle for the area you want to transfer to the Pocket PC.
Use Ctrl+Up, Ctrl+Down to zoom out and zoom in. Click on the the borders of the map to move
horizontally and vertically. This is the same procedure as in the other Map views in SeeYou.
Fourth page shows progress in transferring or saving files.
Once the transfer has completed successfully, you may close Mobile wizard with the Finish button.
156