Naviter Oudie 2, Manual

Page: 98 / 185

Oudie 2 93
© 2003 - 2015 ... Naviter d.o.o.
Through the Command bar
By default, the Goto icon is displayed in the Command bar.
Landable waypoints which can be reached with the current MacCready setting are colored green.
Landable points which can be reached with MacCready setting zero are colored yellow while the others
are not colored. The glideslope calculation considers the altitude reserve if entered in the
Flight
Properties dialog.
There are more columns available than they are seen by default. Arrival height and L/D to the point are
not visible. Make the existing columns thinner to see the others. You may then reorder them by dragging
the column header to a new location.
Pressing the Details button will open a new window where you can read waypoint details and edit
waypoint properties. It will close automatically after 10 seconds or when you press the OK/Goto button.
Since the waypoint list may be huge there is a quicker way to accessing a particular point alphabetically
by
Filtering the points. When the waypoints are filtered, the Filter caption is highlighted in the
command bar (see screenshot below).
At the bottom of the screen, immediately above the menu, three recently used waypoints are displayed.
Landable points are colored green or yellow if they are reachable. At the top of the screen you can
choose between clearing the target all together, navigating back to takeoff location or back to Soaring
begin (useful for closing a triangle for example).
89
96