Naviter Oudie 2, Manual

Page: 19 / 185

Getting started 14
© 2003 - 2015 ... Naviter d.o.o.
1. Built-in GPS
The built-in GPS in Oudie is always on COM 1 > 4800bps. You can setup the Oudie to use internal GPS by
selecting Menu > Settings > Input > Internal GPS
2. Serial cable connection to external GPS source
The supplied Serial data cable enables you to connect to external data source such as your Variometer,
Flight data recorder, anti-collision device or similar. You should select Menu > Setting > Input > Serial
cable in order to use this option. You will need the manual from the other device in order to determine
the correct Port Settings such as Baud rate. You should always use COM 4 on Oudie for this type of
connection.
The supplied Data/Power cable has a RJ45 connector by default with standard IGC pinout. Several
converters are included in the box which enable you to connect to flight recorders with RJ12 or DB9
connectors. Special cables are also available as an accessory for a very simple direct connection to some
specific flight recorders such as LX 7007, CAI 302, LX 1600 etc. Please refer to the chapter
Cables and
Converters of this manual to learn more about how to connect your Oudie with different GPS devices.
It is very important to understand that the supplied Serial cable must be connected to 12 V direct current
source (such as your glider's battery) in order to work.
15