Naviter Oudie 2, Manual

Page: 143 / 185

Settings 138
© 2003 - 2015 ... Naviter d.o.o.
Simulator
In this mode a glider is controlled by dragging a line out of the glider thus telling it in which direction to
move and how fast. You can specify a start Latitude and Longitude through the edit boxes if you wish.
File
This mode takes an IGC file and animates an old flight. This is the most perfect way to test the
application. You will be able to rely on own feelings from the actual flight and observe what SeeYou
Mobile would have been telling you if you had it with you in the air at that time. Use the "..." button to
select a flight you wish to animate and the Rate spinner to select how fast the animation should run.
A particularly useful way to replay a flight is if you managed to save a NMEA log of your flight. In the
NMEA log all of the messages that were sent to the device may be reproduced on screen, including other
Flarm data and its warnings. To replay a saved NMEA log you
need to create a "TMP" folder in the root of your Oudie memory, save the NMEA log as "nmeain.log" and
select "File" as your input in Menu > Settings > input.
8.14.1 Port Settings
This dialog sets up preferences for the GPS input like COM port (or GPD software port), COM
speed, Parity, Bits and stop bit .