Naviter Oudie 2 Manual Download Page 107

Page: 107 / 185

Menu

102

setup

Task Options

List

to change to graphical view.

7.11.3 Edit Point

Point

Choose the waypoint name. Note that the easiest way to do this is by typing its name in

List view

Elev = Elevation

This is the reference altitude for the point in question. This is the altitude that is taken into account when
calculating the final glide.

Direction

This option changes the direction of the observation zone. It can either be towards the Next or Previous
point, a Fixed value (Angle12) or Symmetric to the courses in and out of the waypoint.

Angle12

If Fixed value is selected from the Direction combo box, a direction of the sector will be symmetrical to
this value.

Radius1, Angle1, Radius2

and

Angle2

will setup the sector in the same way as already used to in the

104

100

Summary of Contents for Oudie 2


























































































































































































Search results

Summary of Contents for Oudie 2

Reviews:

Related manuals for Oudie 2

Brands by name

Popular brands

Naviter Oudie 2, Manual

Search results

Summary of Contents for Oudie 2

Reviews:

Related manuals for Oudie 2

Brands by name

Popular brands