Naviter Oudie 2, Manual

Page: 21 / 185

Getting started 16
© 2003 - 2015 ... Naviter d.o.o.
3. 20 cm cable extension with male RJ12 connectors
This is an extension cable which can be used for both power
and data transmission between Oudie and connected device. It
must be used together with RJ45 Gender Changer. RJ12 can
be plugged into the RJ45 connector on the Gender Changer.
The other end is connected with the device. Pins 1 and 8 are
not connected when RJ12 cable is connected to the RJ45
Gender Changer.
Use RJ45 Gender Changer and RJ12 cable extension directly with these devices:
Colibri, LX 20/2000,
MiniBox, RedBox
4. RJ45->DB9 Male and Female converters
This is a "do-it-yourself" DB9 converter. The converter pinout is free. You can pin any wire from the RJ45
connector to any pin on the DB9 connector.
Typical use:
. LX 5000, LX 7000: Use female DB9 connector: Black -> 2 (Transmit from Oudie), Red -> 3 (Receive to
Oudie), Orange -> 5 (Ground)
. GPS-NAV, SN10 Standard RS 232: Use male DB9 connector: Black -> 3 (Transmit from Oudie), Red ->
2 (Receive to Oudie), Orange -> 5 (Ground)
. LX 160 (NOT the "si" version - see the warning below): Use female DB9 connector: Black -> 4
(Transmit from Oudie), Red -> 3 (Receive to Oudie), Orange -> 1 (Ground)
. Zander/SDI GP940 and GP941: Black->3 (Transmit from Oudie), Red->2 (Receive to Oudie), Orange->5
(Ground), Brown->4 (DTR)
WARNING : If you are attempting to connect to devices which provide 5V on any of the pins please make
absolutely sure that the pin where the other device provides 5V is not connected to the White or Brown
wires (pins 1 and 2 on RJ45). This will cause collision and possibly damage to both connected devices!
Take particular care when connecting the following devices: Cambridge 302, LX 7007, LX 1600, LX160si,
Nano and others with built-in 12->5V converter. Be especially careful not to plug the standard Oudie and
standard Nano cable together because the plugs are compatible but the pinout is not!
RJ45 wire's colors:
1 = White (+12V)
2 = Brown (+12V)
3 = Yellow
4 = Green
5 = Red (Receive to Oudie)
6 = Black (Transmit from Oudie)
7 = Orange (Ground)
8 = Blue (Ground)
=============================================
The following cables are available as optional accessories :
1. CAI 302 Cable
Connects all models of Cambridge 302 with Oudie. This is a direct cable from CAI to Oudie which
provides both power and data communication between Oudie and CAI 302