Naviter Oudie 2, Manual

Page: 95 / 185

Menu 90
© 2003 - 2015 ... Naviter d.o.o.
Take-off altitude
By changing this setting you can change your take-off altitude. Setting up this value correctly is essential
for correct final glide indications. When there is a waypoint or the terrain map with elevations in vicinity,
there is a suggestion at what to set up in the top line of this dialog. By default Oudie will try to use its
automatics to select the correct takeoff altitude.
QNH
By changing the QNH value you can change the pressure at start or change the QNH in flight to correct
the change in pressure. By default Oudie will try to use its automatics to select the correct QNH.
Linked
When the values are linked then changing one value will also change the other one. Unlink only if you are
instructed by someone to do so.
MacCready
You can setup the MC setting here. The optimum value for the MC setting can be derived from the
statistics page and other Navboxes.
Bugs
By changing the Bugs value you can degrade the performance of the polar by a certain percentage.
Ballast