Naviter Oudie 2, Manual

Page: 132 / 185

Oudie 2 127
© 2003 - 2015 ... Naviter d.o.o.
. Task speed (Tsk.Sp.) = Speed on task until the present position
. Task required speed (tReq.Sp) = Average speed you need to achieve to complete the task inside the
Task time
Statistics navboxes:
. Thermal vario (VarT) = average vario since beginning of circling
. Optimized distance (Opt) = Optimization over a preselected number of waypoints (default is OLC
optimization)
.
Closed optimized distance (cOpt) = Optimization of flight if you return back to the point of takeoff
. Triangle distance (Tri) = Triangle optimization.
. Speed Last hour (60'.Sp) = Average speed achieved in the last 60 minutes
. Flight time = Flying duration
. Engine running = will reset optimization when "engine" is stopped. Tap on the navbox changes the
state of the "engine"
Action buttons:
There are a few "dummy" navboxes which are used on devices with few hardware buttons. Due to the
lack of hardware buttons you may place "software" buttons in the shape of a Navbox on your screen. The
following "buttons" are supported:
.
MC increase will increase the MacCready value by 0.1 m/s or 0.2 kts
. MC decrease will decrease the MacCready value by 0.1 m/s or 0.2 kts
. Volume increase will increase the Volume of the device
. Volume decrease will decrease the Volume of the device
. Map 1 page will switch view to Map 1
. Map 2 page will switch view to Map 2
. Statistics page will switch view to Statistics page
. Info page will switch view to Info page
. Zoom in
. Zoom out
. Sideview will turn ON or turn OFF Side view .
. LiveTrack24 shows time from last successful communication with LiveTrack24 server
. Soaring Spot shows time from last successful communication with Soaring Spot server
When Select multiple is checked you can tap on a single navbox to select it and keep selected the ones
that were already selected. To select a number of navboxes at once, tap, hold and move the stylus.
Select All quickly selects all navboxes, so you can use the Edit button.
Edit... button allows you to change common values of the navboxes. Select single or several navboxes by
dragging the stylus over the navbox names. Then press Edit to select the Number of lines you wish
them to have and whether or not you want the selected navboxes to be Transparent .
You can assign an Action to each of the Navboxes. Action is performed when you tap on a specific
navbox. By default, only Team navbox has an action assigned to it. Tapping on the Team navbox will
open the
Team dialog where you can enter your teammate's position code.
Auto Arrange check box will rearrange new navboxes so, that they stack at the bottom of the screen.
Show navboxes check box will hide navboxes if not checked.
62
62
78
76
28
109