![background image](http://html1.mh-extra.com/html/national-instruments/ni-edids-2400-series/ni-edids-2400-series_user-manual_3427881093.webp)
NI EDIDS-2400 Series User Manual | © National Instruments | 93
ESTTL1_SkipFire_OnCycle
Tip Strip: Specifies the number of active cycles during Skip Fire Sequence (Min = 1).
Detail: Specifies the number of active cycles included in a Skip Fire Sequence when the DI injector is operated in
EPT mode. For example, if the number 4 is entered and
is set to 7, the ESTTL1 module
will output a continuous seven cycle sequence with four active cycles as long as
enabled for the desired channel.
GlobalTDCOffset
Tip Strip: Global TDC offset between absolute 0 and TDC1
Units: CAD
Detail: Crank angle degrees between the EPT absolute zero position and TDC1. When TDC1 is before EPT
is negative. When TDC1 is after EPT absolute zero position, then
is positive. The absolute zero position is specific to the
.
TDCX
Tip Strip: Top Dead Center
Units: CAD
Detail: Crank angle degrees of offset between the TDC1 and TDCX, where X represents the cylinder number.
Typically, engine cylinder #1 will have a TDC of zero because the
is used to specify CAD between
absolute zero and TDC1. The other TDC parameters will have non-zero values, which specify the CAD spacing
Summary of Contents for NI EDIDS-2400 Series
