National Instruments NI EDIDS-2400 Series, User Manual, Page: 256 / 314

256 | ni.com | NI EDIDS-2400 Series User Manual
Termination
Tip Strip: Enables 120 Ohm termination at the module
Detail: The Termination property configures the onboard 120 Ohm termination of the NI-XNET interface CAN
connector (port). If your bus already has the correct amount of termination, leave this property in the default state of
Off. However, if you require termination, set this property to On.
CAN Interface
Tip Strip: CAN Interface Module when module is externally powered and recognized by the software
Detail: The interface represents a single CAN on an NI hardware device. Within NI-XNET, the interface is the object
used to communicate with external hardware
described in the database. If the module is in the assigned slot and is externally powered, the module should appear
under a generic “CAN
X
”. If the field is blank, check the module slot assignment and power wiring to the module.
Baud_Rate
Tip Strip: CAN communication data transfer rate
Units: bit/s
Detail: NI-XNET CAN hardware currently accepts the following numeric baud rates: 33333, 40000,50000, 62500,
80000, 83333, 100000, 125000, 160000, 200000, 250000, 400000, 500000,800000, and 1000000.
Refresh Database
Tip Strip: Refreshes a list of deployed databases on this controller
Detail: Press this button to refresh database list after deploying or undeploying a database