NI EDIDS-2400 Series User Manual | © National Instruments | 111
FALSE :
Use Analog1 (V) as the primary position sensor signal.
Use Analog2 (V) as the secondary position sensor signal.
TRUE :
Use Analog2 (V) as the primary position sensor signal.
Use Analog1 (V) as the secondary position sensor signal.
ATTENTION:
This parameter should only be modified during IDLE mode. If this input is modified, then initialize must
be set to TRUE for the new value to take affect.
Init_ChX
Tip Strip: Captures the Position Cal In and Primary Position inputs for position calibration. Do not set true during
CONTROL mode.
Detail: When TRUE, captures the Position Cal In and Primary Position inputs for proper position calibration. Do not
set this input to TRUE during CONTROL mode.
Freq_ChX
Tip Strip: Switching PWM frequency for driving Throttle actuator
Units: Hz
Detail: Indicates switching Pulse Width Modulation (PWM) frequency for driving Throttle actuator
PosSetpoint_ChX
Tip Strip: Throttle Channel X Position Setpoint
Units: %
Detail: Indicates the throttle position setpoint in percentage.
Summary of Contents for NI EDIDS-2400 Series
