manualshive.com logo in svg

National Instruments NI EDIDS-2400 Series, User Manual, Page: 311 / 314

Share
Download
National Instruments NI EDIDS-2400 Series User Manual Download Page 311

 

NI EDIDS-2400 Series User Manual  |  © National Instruments  |  311

8.3 Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on National Instruments

trademarks.

 

ARM, Keil, and µVision are trademarks or registered of ARM Ltd or its subsidiaries.

 

LEGO, the LEGO logo, WEDO, and MINDSTORMS are trademarks of the LEGO Group. ©2013 The LEGO Group.

 

TETRIX by Pitsco is a trademark of Pitsco, Inc. ©2013.

 

FIELDBUS FOUNDATION™ and FOUNDATION™ are trademarks of the Fieldbus Foundation.

 

EtherCAT® is a registered trademark of and licensed by Beckhoff Automation GmbH.

 

CANopen® is a registered Community Trademark of CAN in Automation e.V.

 

DeviceNet™ and EtherNet/IP™ are trademarks of ODVA.

 

Go!, SensorDAQ, and Vernier are registered trademarks of Vernier Software & Technology. Vernier Software &

Technology and vernier.com are trademarks or trade dress.

 

Xilinx is the registered trademark of Xilinx, Inc.

 

Taptite and Trilobular are registered trademarks of Research Engineering & Manufacturing Inc.

 

FireWire® is the registered trademark of Apple Inc.

 

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

 

Handle Graphics®, MATLAB®, Real-Time Workshop®, Simulink®, Stateflow®, and xPC TargetBox® are registered

trademarks, and TargetBox™ and Target Language Compiler™ are trademarks of The MathWorks, Inc.

 

Tektronix®, Tek, and Tektronix, Enabling Technology are registered trademarks of Tektronix, Inc.

 

The Bluetooth® word mark is a registered trademark owned by the Bluetooth SIG, Inc.

 

The ExpressCard™ word mark and logos are owned by PCMCIA and any use of such marks by National

Instruments is under license.

 

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of

Microsoft Corporation in the United States and other countries.

 

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

 

Members of the National Instruments Alliance Partner Program are business entities independent from National

Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.

Summary of Contents for NI EDIDS-2400 Series



























































































































































































































































































































Reviews:

No comments