National Instruments NI EDIDS-2400 Series, User Manual, Page: 137 / 314

NI EDIDS-2400 Series User Manual | © National Instruments | 137
six digital input sources associated with the 9411_1 slot are available. If there is only one NI 9411 module inserted in
the 9411_2 slot, then only six digital input sources associated with the 9411_2 slot are available.
There are four internally generated PWM signal sources always available that are configured via the Auxiliary PWM
Setup window .
Multiple destination controls that are not on the same row can have the same selected digital signal source.
However, controls that are on the same row cannot have the same selected digital signal source. Across a given
row, once a digital signal source is selected, it will be grayed out.
Each of the destination controls listed below have a similar drop-down selection of digital signal source and are
described below.
Crank_DigChanAsn
Tip Strip: Assigns digital signal source to crank signal
Detail: Signal directed to the EPT crank trigger input. The EPT is configured via the Engine Position Tracking
Setup window. This signal is applicable for all EPT pattern types. When tracking encoder patterns, assign the high-
resolution encoder A signal to the crank signal.
EncoderZ_DigChanAsn