National Instruments NI EDIDS-2400 Series, User Manual, Page: 113 / 314

NI EDIDS-2400 Series User Manual | © National Instruments | 113
PsnCalReturnFromPosDelay_ChX
Tip Strip: Time delay from the end of pos cal to the start of neg cal.
Units: s (seconds)
Detail: Indicates time delay (in seconds) from the end of positive position calibration to start of negative calibration.
This time must be long enough to allow the throttle plate to return to the limp-home position before negative
calibration. Otherwise the limp-home position will not be properly detected.
PsnCalReturnFromNegDelay_ChX
Tip Strip: Time delay from the end of neg pos cal to the start of pos cal phase.
Units: s (seconds)
Detail: Indicates time delay (in seconds) from the start of position calibration initialization phase to start of positive
calibration. This time allows the throttle plate to return to the limp-home position before positive calibration.
uPsnCalPos_Init_ChX
Tip Strip: The initial drive voltage to the throttle motor for positive position calibration. (Positive)
Units: V
Detail: Indicates the initial drive voltage to the throttle motor for positive position calibration. This voltage should be
selected to move the throttle plate most of the way toward maximum position without hitting maximum position. This
parameter should be a positive value.
uPsnCalNeg_Init_ChX
Tip Strip: The initial drive voltage to the throttle motor for negative position calibration. (Negative)
Units: V