National Instruments NI EDIDS-2400 Series, User Manual, Page: 66 / 314

66 | ni.com | NI EDIDS-2400 Series User Manual
The main user interface window contains a list of all setup windows used to configure the various DI Driver System
functions. Double-clicking on a setup window name will open the window and make the listed name bold. Multiple
setup windows may be open simultaneously. Pressing the X in the upper right corner of each window will close the
window. Also, double clicking the bolded window name within the main window list will close the window. A single
click of a bolded window name will bring the selected window to the top with focus. Pressing the X in the upper right
corner of the main user interface window, or pressing the red square button in the SCM console (3rd from left)
will close all open setup windows and stop user interface communications with the DI Driver System. However, the
system will still continue to operate according to the most recent user interface settings. The user interface can be
started again by pressing the green run button within the SCM console.
SCM console buttons while DI Driver System user interface is closed
SCM console buttons while DI Driver System user interface is open
The DI Driver System can operate automatically, when powered up, according to settings saved to a system
calibration file. The calibration file can be saved while the user interface is open by pressing the purple default
calibration save button from the SCM console (4th from left). The default save function will save all current settings
within the setup windows to the default calibration file. The default calibration file is located on the DI Driver System
controller at “C:\system\ni-rt\LabVIEW Data\DefaultCal.cdl”. The file system of the DI Driver System controller can
be browsed using an FTP client. A recommended FTP client is FileZilla . It is not recommended to use the FTP
connection within the Windows file Explorer.