National Instruments NI EDIDS-2400 Series, User Manual, Page: 141 / 314

NI EDIDS-2400 Series User Manual | © National Instruments | 141
Multiple destination controls that are not on the same row can have the same selected digital signal source.
However, controls that are on the same row cannot have the same selected digital signal source. Across a given
row, once a digital signal source is selected, it will be grayed out.
Each of the destination controls listed below have a similar drop-down selection of digital signal source and are
described below.
Exp_Crank_DigChanAsn
Tip Strip: Assigns digital signal source to crank signal
Detail: Signal directed to the EPT crank trigger input. The EPT is configured via the Engine Position Tracking
Setup window. This signal is applicable for all EPT pattern types. When tracking encoder patterns, assign the high-
resolution encoder A signal to the crank signal.
Exp_EncZ_DigChanAsn
Tip Strip: Assigns digital signal source to encoder Z signal
Detail: Signal directed to the EPT cam trigger input through an optional masking AND gate with either Cam1 or
Cam2. The EPT is configured via the Engine Position Tracking Setup window. This signal is applicable for encoder