National Instruments NI EDIDS-2400 Series, User Manual, Page: 29 / 314

NI EDIDS-2400 Series User Manual | © National Instruments | 29
This will cause SCM to search the network for a National Instruments RT controller, such as the cRIO-9082 .
If the DI Driver System controller is discovered, take note of the discovered IP address. The Windows PC
used to interface with the system must have a similar IP address and Subnet mask as the system controller,
but the IP address must be different in the last address number. The Subnet mask should be 255.255.255.0.
Refer to the Out Of The Box Connection section to see how to change the IP address of the Windows PC.
The Select RT System dialog may be exited by selecting the Cancel button. The Backup Target dialog may
be exited by selecting the Back button. The Real-Time System Backup dialog may be exited by selecting
the Exit button.
4. Check the System Controller Ethernet Cable Connection