National Instruments NI EDIDS-2400 Series, User Manual, Page: 144 / 314

144 | ni.com | NI EDIDS-2400 Series User Manual
4.8.1 VR/Hall Input Setup Window
The purpose of the VR/Hall Input Setup window is to configure the operation of each of the NI 9760 VR/Hall input
channels. Each of the six channels can be configured to operate in one of four modes: VR Adaptive Arm (the default
mode), VR Manual Arm, Hall, or Hall with Pull-up.
In order to utilize signals generated by VR sensors to enable EPT Sync on the cRIO-9082 chassis, configure the
desired VR/Hall channels on this window and then wire the corresponding output pins on the NI 9760 module to pins
on one of the NI 9411 Digital Input modules mounted on the cRIO-9082 chassis to send the signal to that chassis.
Without making that additional wiring connection, there is no way to use the NI 9760 to obtain EPT Sync on the
cRIO-9082.
VRHall_Module_Present
Tip Strip: VR Hall Module Present
Detail: Reports presence of NI 9760 VR/Hall module in chassis.
VRHallFaultClear