![background image](http://html1.mh-extra.com/html/national-instruments/ni-edids-2400-series/ni-edids-2400-series_user-manual_3427881246.webp)
246 | ni.com | NI EDIDS-2400 Series User Manual
Tip Strip: Enable operating point function
Detail: When
ON
, operating points are active according to the operating point table, and the table values will override
the parameter values specified elsewhere within the DI Driver System setup windows. When
OFF
, the parameter
values will remain set to the most recent values used from the operating point table. For example, HVTarget for DI
Driver Module 1 may be set to 50V via the
. The Operating Point Setup window may implement a
time-based table for incrementing HVTarget by 10V every 10 seconds, from 50V to 100V. At the end of the operating
point cycle, HVTarget will be left at the last operating point of 100V. If it is desired that HVTarget be set back to 50V,
then an additional operating point should be added to the end of the table to revert back to 50V.
Pause OP
pause operating point execution
Detail: When
ON
, pauses the table to remain at the current operating point. When
OFF
, operating point operation
resumes. This parameter is only applicable when
ON
.
Reset OP
reset operating point execution to point 0
Detail: In
, when
ON
, resets the operating point back to zero. This parameter is not applicable to
. This parameter is only applicable when
ON
.
Manually Set OP
Tip Strip: Causes execution of Manual OP
Detail: When
ON
, sets the operating point to the point specified by the value to the left of the button. In
,
when set to
OFF
execution will resume at the current operating point. In
OFF
execution
will resume at the operating point determined by the
Process Variable Trigger Wildcards
Number of OP
Tip Strip: Number of operating points to be considered for execution
Detail: Specifies the number of operating points to be considered by the operating point function. For example, if
greater will not be considered.
Summary of Contents for NI EDIDS-2400 Series
