National Instruments NI EDIDS-2400 Series, User Manual, Page: 228 / 314

228 | ni.com | NI EDIDS-2400 Series User Manual
RailP
Tip Strip: Rail pressure in bar
Units: bar
Detail: Rail pressure used as feedback to the PID controller. The analog channel utilized for pressure feedback
is selected via RailP_Channel . The analog channel must be converted to units of bar via the Analog Input Setup
window.
RailP_ControlMode
Tip Strip: Selects the IMV or HPV as controlled by PID
Detail: Selects between
IMV PID Mode
or
HPV PID Mode
. When in
IMV PID Mode
, the HPV PID control parameters
will be disabled (grayed out) and the HPV will be controlled by a constant duty cycle and frequency. When in HPV
PID Mode , the IMV PID control parameters will be disabled (grayed out) and the IMV will be controlled by a constant
duty cycle and frequency.
Clear RailP Fault
Tip Strip: Clears faults related to rail pressure control
Detail: Clears RailP_Fault after the fault has been resolved.
RPC Plot
Tip Strip: Opens a plot window of RailP_Setpoint , RailP , IMV_DC and HPV_DC .