National Instruments NI EDIDS-2400 Series, User Manual, Page: 151 / 314

NI EDIDS-2400 Series User Manual | © National Instruments | 151
Tip Strip: Manually triggers TMP injection command sequence
Detail: Pressing this button will trigger the configured TMP command sequence to the associated DI Driver module
channel. The sequence will be triggered once with each button press.
Enable Individual DIX Channel Duration
Tip Strip: Enables individual channel duration setpoint for each channel
Detail: When ON, this button will enables individual channel durations for each if the three DI Driver module
channels. When OFF, each channel receives a uniform duration command.
Pulse #
Tip Strip: Enables injection pulse
Detail: When
ON
, the command to the associated DI Driver module channel will be active for the specified duration.
When OFF , the command will be inactive (low), but the specified delay and duration will still be implemented without
effecting the adjacent pulses.
Delay
Tip Strip: Time until beginning of this injection pulse
Units: msec
Detail: For Inj 1, specifies the delay of the start of Inj 1 from the trigger event. For all other pulses, specifies the delay
of the start of Inj X from the end of the previous pulse.