background image

ALBRECHT  -

ALBRECHT  -

 

 

Pulsors

Pulsors

Pneumatic Loosening and

Fluidisation of Bulk Solids

and Filter Dust

Repair  Instructions

ALBRECHT  Ingenieurbüro GmbH

ALBRECHT  Ingenieurbüro GmbH

Flow Promotion Technology

Flow Promotion Technology

Mangenberger Str. 33 

Mangenberger Str. 33 

for Bulk Solids and Filter Dust

for Bulk Solids and Filter Dust

D- 

D- 

42655 Solingen 

42655 Solingen 

• Germany

• Germany

Phone:

Phone:

+49 - (0)212 - 16393

+49 - (0)212 - 16393

Fax

+49 - (0)212 - 201644

+49 - (0)212 - 201644

Email:

Email:

[email protected]

[email protected]

Internet:

Internet:

www.pulsoren.com

www.pulsoren.com

Summary of Contents for Pulsors

Page 1: ...romotion Technology Flow Promotion Technology Mangenberger Str 33 Mangenberger Str 33 for Bulk Solids and Filter Dust for Bulk Solids and Filter Dust D D 42655 Solingen 42655 Solingen Germany Germany Phone Phone 49 0 212 16393 49 0 212 16393 Fax 49 0 212 201644 49 0 212 201644 Email Email albrecht pulsoren com albrecht pulsoren com Internet Internet www pulsoren com www pulsoren com ...

Page 2: ... the pipe To do so slightly loosen the union nut of the assembly union at the nozzle without unscrewing it completely Loosen the conical pipe union with light strokes rubber hammer till the nozzle with the Pulsor can be turned inside the weld on nipple Align the Pulsor and the nozzle in such a way that the valve can be installed easily Firmly tighten the union nut of the assembly union again f Att...

Page 3: ...til the cover can easily be removed or carefully use a screw driver or little chisel to open the housing b Inspect the Pulsor plate 1 2 The plate must be firmly glued into the bottom When hit slightly with e g a screw driver a bright and clear sound must be heared The sealing edge of the plate on which the rubber diaphragm sits must not be damaged or have notches The edge must protrude uniformly a...

Page 4: ...se nozzle is hardened and agglutinated to the nozzle tube screwlock Do not screw off by force The nozzle head type 20 with a diameter of 21 0 mm old design can not be screwed off and changed because it is riveted Only the heads with a diameter of 21 3 mm new design can be screwed off and changed a For change of the nozzle heads carfully heat it with a propane butane gas flame up to about 200 C unt...

Reviews: