National Instruments NI EDIDS-2400 Series, User Manual, Page: 74 / 314

74 | ni.com | NI EDIDS-2400 Series User Manual
Tip Strip: DI Driver battery voltage level
Units: V
Detail: Indicates the external battery voltage supply level to DI Driver module terminals 0 (BATT) and 9 (GND). This
should be in the range of 9-32V. While the internal boost supply will function from the 9-32V battery voltage, it will
operate more efficiently and cooler if the battery voltage is in the range of 24V, as opposed to 12V. The performance
and power dissipation of the module and internal boost power supply are dependent on the injector load and rate of
injection events.
Internal High Voltage
Tip Strip: Internal boost supply high voltage level
Units: V
Detail: Indicates the actual internal boost power supply voltage.
External High Voltage
Tip Strip: High voltage level supplied externally to terminal 7 of DI Driver to override internal boost supply
Units:V
Detail: Indicates the external high voltage supply level. If the external high voltage supply pin (7 EXT PWR) is
connected to a level greater than 24V, then the internal boost power supply will automatically shut down and rely on
external power. Using an external high voltage supply is occasionally necessary, depending on injector operating
requirements. Contact your National Instruments sales engineer or support team to determine if your application
requires an external high voltage supply.