National Instruments NI EDIDS-2400 Series, User Manual, Page: 162 / 314

162 | ni.com | NI EDIDS-2400 Series User Manual
Average Duration
Detail: Displays the average duration of the injection commands for all three channels.
SkipFire_DI1_ChnX
Tip Strip: Enables Skip Fire on DI channel when EPT Mode is selected
Detail: Enables the skip fire sequence defined by SkipFire_Cycles and SkipFire_OnCycle for their assigned DI
channels. It is also manipulated by the corresponding SkipFire_DI1_ChnX buttons on the DI-EPT Pulse Generation
Tab .
SkipFire_Cycles
Tip Strip: Specifies the period length, in number of cycles, for the skip fire sequence in EPT Mode (Min = 1).
Detail: Specifies the number of cycles included in a skip fire sequence when the DI injector is operated in EPT mode.
For example, if the number 7 is entered, the DI injector will continuously repeat a seven cycle sequence as long as
SkipFire_DI1_ChnX is enabled for the desired channel. It is also manipulated by the corresponding SkipFire_Cycles
controls on the DI-EPT Pulse Generation Tab and the other DIX Advanced Settings windows.
SkipFire_OnCycle
Tip Strip: Specifies the number of active cycles during skip fire sequence in EPT Mode (Min = 1).
Detail: Specifies the number of active cycles included in a skip fire sequence when the DI injector is operated
in EPT mode. For example, if the number 4 is entered and DI SkipFire_Cycles is set to 7, the DI injector will
continuously repeat a seven cycle sequence with four active cycles, followed by three inactive cycles as
long as SkipFire_DI1_ChnX is enabled for the desired channel. It is also manipulated by the corresponding
SkipFire_OnCycle control on the DI-EPT Pulse Generation Tab and the other DIX Advanced Settings windows.