National Instruments NI EDIDS-2400 Series, User Manual, Page: 232 / 314

232 | ni.com | NI EDIDS-2400 Series User Manual
Tip Strip: IMV PID controller output added to IMV_PIDFF . Result is directed to selected PFI LS channel duty cycle
parameter.
Units: %
Detail: Output value from the PID controller. This value is limited by the values in IMV_PIDMin and IMV_PIDMax .
This value is added to IMV_PIDFF and the result is placed in IMV_DC .
IMV_ManualOverride
Tip Strip: Causes ManualDC to override IMV PID final output
Detail: When ON, Cause the PID controller to be bypassed and sets PWM parameters for the IMV with a constant
duty cycle defined by IMV_ManualDC .
IMV_ManualDC
Tip Strip: Value to override IMV PID final output when ManualOverride=TRUE
Units: %
Detail: Manual duty cycle applied to IMV when IMV_ManualOverride is on.
IMV_MaxDCCalc
Tip Strip: Maximum allowed duty cycle for IMV based on battery voltage and nominal solenoid resistance to limit
current to 3A for channel pair
Units: %
Detail: Maximum duty cycle limit based on the battery voltage and the nominal resistance of the valve. This value
prevents the current from exceeding the limitations of the LS channels driving the IMV solenoid.
IMV_MaxDC
Tip Strip: Maximum allowed duty cycle for IMV. This value is effective if lower than IMV_MaxDCCalc .
Units: %
Detail: Maximum allowed duty cycle for IMV. This value is effective if lower than IMV_MaxDCCalc .