MUTOH ValueJet VJ1324X Page 42 Operation Manual Download | Manualshive

Page: 42 / 264

background image

Before using

VJ-1324X OPERATION MANUAL

42

3.3 Installing ink cartridges

NOTE

• Do not share the ink cartridge once installed with another printer. The cartridge will not be usable

from that time onward.

• Use genuine ink cartridges or ink bags for charging.

This printer is designed to use genuine ink cartridges or ink bags.
If you use ink cartridges or ink bags which are not produced by the original manufacturer,

• Printing might become blurred and the end of the ink in the cartridge or bag might not be detected

correctly.

• Any problems caused by using an ink cartridge or bag other than those recommended above will

not be covered by the warranty, and repair expenses will be paid by the customer.

• For types and details of ink cartridges and ink bags, contact your local MUTOH dealer.

• Do not give ink cartridges or ink bags strong shakes.

Doing so may cause ink leakage.

• Do not disassemble ink cartridges or ink bags.

A disassembled ink cartridge cannot be used.

• Make sure to use the dedicated cleaning fluid (Model number: VJ-MSINK3-CL220/VJ-MSINK3-

CL1000).

• Before installing the ink cartridges or ink bags, shake it gently.

Doing so will preserve print quality.

• When an ink cartridges or ink bags is moved from a cold place to warm place, keep the ink

cartridges or ink bags for three hours or more in the new printing environment before printing.

• Do not insert or remove the ink cartridges or ink bags more than 10 times.

If the ink cartridge has been removed/inserted more than 10 times, it cannot be used even though
ink remains.

• The ink cartridges and ink bags for this printer have dedicated IC chip on them.

If removing/inserting the ink cartridges or ink bags and high capacity pack adapters (option) in the
following situations, the information within the IC chips may be damaged and the cartridges cannot
be used.

• During printing

• For several seconds after inserting the ink cartridge

«
...
40
41
42
43
44
...
»

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Reviews:

No comments

Related manuals for ValueJet VJ1324X

Brand: QMS Pages: 86

Brand: Panasonic Pages: 9

Brand: Panasonic Pages: 2

CLP-680ND: CLP-775ND

Brand: Samsung Pages: 2

Brand: Xerox Pages: 414

Brand: Partner Pages: 34

Brand: Tandy Pages: 83

4400B - Phaser B/W Laser Printer

Brand: Xerox Pages: 24

Brand: Kyocera Pages: 72

DocuPrint 4635 IPS Series

Brand: Xerox Pages: 16

Brand: Konica Minolta Pages: 36

M-Class Mark II M-4206

Brand: Datamax Pages: 76

Brand: Digi Pages: 124

Brand: Dell Pages: 4

Brand: Dell Pages: 68

Ink-Free Printer PZ310

Brand: Dell Pages: 22

Brand: Dell Pages: 124

5330dn - Workgroup Laser Printer B/W

Brand: Dell Pages: 204

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands