MUTOH ValueJet VJ1324X Operation Manual Download

Page: 128 / 264

Handling the printer

VJ-1324X OPERATION MANUAL

128

4.4 Operating from the operation panel

4.4.5.2

Settings that can be changed or confirmed while printing

NOTE

• When you change a setting during operation, be sure to select “Backup” to save the setting that you

changed.
If the printer returns to Normal without “Backup” being selected, the changed setting is not saved.

• Check the following before using the Job status items

• The values displayed in the Job status items are rough indications. They do not guarantee the

strict accuracy.

• If the length information is not included in the print data, “0” is displayed for all items.

• You can check the “remaining print” and “remaining time” in the way described in

4.4.8

Normal Display while Printing

• To check the information about the printed data, refer to the following.

Setup item

Setting

Description

Reference

Temperature

Pre

Checks the current temperature of the pre-
heater.

—

Platen

Checks the current temperature of the platen
heater.

Dryer

Checks the current temperature of the dryer.

Pre heater

Off / 30 ºC to 50 ºC

Changes the temperature of the pre-heater.

5.1.1.1.5 Pre-heater

menu

Platen heater

Off / 30 ºC to 50 ºC

Changes the temperature of the platen heater.

5.1.1.1.6 Platen

heater menu

Dryer

Off / 30 ºC to 50 ºC

Changes the temperature of the dryer.

5.1.1.1.7 Dryer

menu

PF Adjust

-5.00% to 0.00 to 5.00% Change the feed adjustment value.

5.1.1.1.4 Dist.Adj

menu

Backup

—

• [Enter] key: Save the changed setting.

—

Job Status

ToDo Length

• Check the whole length of the data (media

feed direction) currently being printed.

—

Done

• Check the printed length of the data

currently being printed.

Remain

• For the data currently being printed, check

the length of the data that has not been
printed.

Remain Time

• Displays the time remaining for printing.

—

• [Cancel] key: The printer returns to

Normal.

—

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands