manualshive.com logo in svg

MUTOH ValueJet VJ1324X, Operation Manual

Share
Download
MUTOH ValueJet VJ1324X Operation Manual Download Page 44

Before using

VJ-1324X OPERATION MANUAL

44

3.3  Installing ink cartridges

4. Set the cleaning cartridge to the ink cartridge slot.

•

Keep   mark of the cleaning cartridge facing up and insert towards the printer side.

•

Insert the cleaning cartridge all the way to the end of the slot.

•

When all cleaning cartridges are installed, “Busy-Washing” is displayed on the operation panel, 
and the printer starts charging the cleaning fluid.

•

When the cleaning fluid has been charged, “Remove Cartridges” is displayed on the operation 
panel.

5. Remove all cleaning cartridges.

•

“Busy-Washing” is displayed on the operation panel and the printer starts head cleaning.

•

When head cleaning is complete, “Wash retry?  No” is displayed on the operation panel.

No.

Name

1

Cleaning cartridge

2

Ink cartridge slots

No.

Name

1

Cleaning cartridge

2

Ink cartridge slots

1

2

2

1

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands