MUTOH ValueJet VJ1324X Operation Manual Download

Page: 130 / 264

Handling the printer

VJ-1324X OPERATION MANUAL

130

4.4 Operating from the operation panel

4.4.7

Start Printing during Warm up

You can start printing even when the heater temperature has not reached the preset value while the printer
is being warmed up.

NOTE

• Even when printing is started during warm up, the printer continues to be warmed up until the preset

temperature has been reached.

• When printing is started during warm up, the print quality is not guaranteed.

1. Check if the printer is the printer is being warmed up.

•

“Warming Up” is displayed on the operation panel.

2. Send the data.

•

“Warming Up” “Skip -> E” is displayed on the operation panel.

CAUTION

• While “Warming Up” is displayed, do not touch Platen and Media guide.

You could burn yourself.

3. When printing during warm up, press the [Enter] key on the operation panel.

•

The printer starts printing.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands