MUTOH ValueJet VJ1324X Operation Manual Download

Page: 60 / 264

Before using

VJ-1324X OPERATION MANUAL

3.4 Loading media

3. Press the [Enter] key on the operation panel.

•

The user type setting is set.

•

“Media initial” is displayed on the operation panel and media initialization starts.

NOTE

• If the following operations are performed in the user type setting menu, the printer starts media

initial operation without specifying a user-defined setting.

• Pressing the [Cancel] key on the operation panel.

• No keys on the operation panel are pressed for 30 seconds.

•

After media initial operation is complete, “Ready to Print” is displayed on the operation panel
and the display shifts to Normal.

4. When using the roll media, turn the scroller by hand to rewind the roll media and eliminate any slack.

•

Media set is complete.

No.

Name

Roll media

Scroller

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands