MUTOH ValueJet VJ1324X Operation Manual Download Page 115

Page: 115 / 264

VJ-1324X OPERATION MANUAL

Handling the printer

4.2 Media

115

4.2.6

Media feed adjustment

This section explains the Media feed adjustment.

The feeding length depends on the media type. The following or similar results may be seen in prints.

•

Printed images overlap.

•

White lines are printed on images.

The accuracy of media feeding may be improved with the following methods.

1. Display the Dist.Adj menu on the operation panel.

a. Press the [Menu] key on the operation panel.

•

“Menu1: Setup>” is displayed on the operation panel.

•

The operation panel shifts to the Setup menu display.

b. Press the [>] key on the operation panel.

•

“Set1: User Type” is displayed on the operation panel.

c. Press the [Enter] key on the operation panel.

•

“User: Type 1” is displayed on the operation panel.

d. Press the [+] key or [-] key on the operation panel to select the media type to use.

e. Press the [Enter] key on the operation panel.

•

“**>1: Print Mode” is displayed on the operation panel.

TIP

•The selected media (Type 1 to 30) is displayed in “**”.

5.1.1 User Type menu

Press the [+] key or [–] key to select “**>3: PF Adjust>”.

g. Press the [>] key on the operation panel.

•

“PF1: Initial Print” is displayed on the operation panel.

•

Proceed to Dist.Adj menu.

5.1.1.1.4 Dist.Adj menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands